By A Mystery Man Writer
Sculpt Nouveau Mold Release is a mold release and casting primer for use in urethane or silicon molds. Cured resin castings will have a fantastic metallic finish that can be aged with cold patinas. Directions: Spray mold release onto the mold using an HVLP spray gun, "touch-up" gun, or air brush. Brush application may
Sculpt Nouveau Mold Release is a mold release and casting primer for use in urethane or silicon molds. Cured resin castings will have a fantastic metallic finish that can be aged with cold patinas.
Directions: Spray mold release onto the mold using an HVLP spray gun, touch-up gun, or air brush. Brush application may be used to apply the release agent to urethane mold surfaces. A hair dryer or heat gun will aid in the brush application. For best performance, use clean molds, free of silicone oil mold release residue. Apply two layers of mold release to fully coat the mold. Let the mold release fully dry at least 30 minutes before casting. Cold patinas, such as Tiffany Green and Darkening, may be used on the finished cast piece. Warming the surface of the finished piece with a hair dryer will help other patinas and patina stains to adhere. Important: Always check your mold for compatibility with the mold release before using.
Sculpt Nouveau Mold Release is available in bronze, brass, copper, gold, silver, and neutral colors and in 8oz., 32oz., 1 gallon, and 5 gallon sizes. One gallon of Mold Release generally covers 200 sq. ft. per coat. Two to three coats are recommended.
Copper Powder – brickintheyard
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should be diluted with
Sculpt Nouveau A-14 Black for Aluminum, 32 oz.
Metal Coatings – brickintheyard
Stainless Black Patina is made specifically for stainless steel. It is not recommended for other metals, but on zinc and galvanized steel, it can
Sculpt Nouveau Stainless Black, 8 oz.
The Future of Mold Release Agents: What's New and What's Coming
The Future of Mold Release Agents: What's New and What's Coming
Metal Coatings – Sculpt Nouveau
Introducing Hydro Clear
Clear Guard EF - The Compleat Sculptor
Ferric Nitrate Patina creates a transparent brown patina when applied hot to bronze, brass, and copper. Ferric Nitrate Patina is commonly used over a
Sculpt Nouveau Traditional Ferric Nitrate Patina
For best results, apply Rainbow Patina to a shiny and clean metal surface. This patina does not work with the Metal Coatings.
Sculpt Nouveau Traditional Rainbow Patina
Birchwood Casey Aluminum, Brass, Bronze and Copper Patinas - All Sizes
Clear Guard – brickintheyard
Sculpt Nouveau Finishing Kit – brickintheyard