NEWS

7/8 Male Flare Union SAE 45 Degree Fitting, Brass - SAE J512 – All Pro Truck Parts

By A Mystery Man Writer

Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry. 7/8 Male Flare Union Specs: Hex - 1.25" Length - 2.72" Type - SAE Flare Union Angle - 45 Degrees Thread Size - 7/8”-14 Tube Outer Diameter - 5/8" SAE J512 B
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry. 7/8 Male Flare Union Specs: Hex - 1.25 Length - 2.72 Type - SAE Flare Union Angle - 45 Degrees Thread Size - 7/8”-14 Tube Outer Diameter - 5/8 SAE J512 Benefits: Durable Chemically resistant Broad range of operating temperatures SAE 45 degree flare vs SAE 37 degree flare JIC: 45 Degree and 37 degree fittings SAE fittings do share the same thread form. i.e. 7/8-14. But are not compatible in terms of fitment, unless your fitting is a 45/37 which is specifically designed to seat either 45 or 37 degrees. 7/8 Male Flare Union Cross References: AMC 04042-14 7/8 SAE Flare Parker 42F-14 7/8 SAE Flare MAF 42-14 7/8 SAE Flare Champion Brass U2-14 7/8 SAE Flare Tip: if you don't have a gauge to identify a fittings angle. Fold a sticky note or piece of paper from one corner to the opposite corner, now you have a 45 degree gauge. Stand your fitting on end. if the paper is flush on both the fitting and the surface its sitting on, then your fitting is 45 degrees.

Parker's 45° flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to