Tool Shackle (2-Pack) installs onto the midsection of waisted/necked tools like spud wrenches, combination wrenches and hammers, to create a retrofit attachment point for tethering tools up to 15lb // 6.8kg, preventing dropped or falling objects from occurring on the job.
The Squids 3790 Tool Shackle (2-Pack) installs onto the midsection of waisted/necked tools like spud wrenches, combination wrenches and hammers, to create a retrofit attachment point for tethering tools up to 15lb // 6.8kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools with small or no captive holes. While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.</p>
STRAIGHTFORWARD INSTALLATION</h3>
To install, unscrew the crossbar and slide the U-shaped shackle around the neck or waist of the hand tool. Apply thread adhesive to the threads of the crossbar and reconnect, using a pair of pliers to firmly tighten the crossbar. Built with strong stainless steel, this tool shackle is durable and will not corrode in extreme environments.</p>
TESTED TO BE TRUSTED</h3>
These tool tether attachments are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. These attachments are third-party certified to 15lb // 6.8kg maximum capacity and meet the ANSI/ISEA 121-2018 standard with all required labeling.</p>
Ideal for those tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk.</p>
Four sizes of tool shackles are compatible on tools with diameters ranging from 0.40in // 10mm to 0.80in // 20mm. Reference the size chart for specific ranges per size.</p>
Pulley Shackle
Super Quality: 3/4 D Ring Shackle Was Made of Heavy Duty Drop Forged Steel and The Towing Capacity Up To 4.75 Tons (10,471 Pounds) For Superior
AUTMATCH D Ring Shackle 3/4 Shackles (2 Pack) 41,887Ibs Break Strength with 7/8 Screw Pin and Shackle Isolator Washers Kit for Tow Strap Winch Off
Permanent roof tie-off anchor constructed from stainless steel and zinc-plated steel. Connecting D-ring fits a variety of connectors.
Guardian Ridge-It Permanent Roof Safety Anchor, D-Ring
3/16 Type 316 Stainless Captive Screw Pin D Shackle (WLL 500 lbs)
1/2 Type 316 Stainless Screw Pin Long D Shackle (WLL 1500 lbs)
3/4 Type 316 Stainless No-Snag Screw Pin D Shackle (WLL 4000 lbs)
3/4 D ring shackle is made of superior heavy-duty drop forged steel, with a 7/8 diameter pin, also an outer nut to avoid the fallen, the insurance
Shackles 3/4 Inch D Ring Shackle (2 Pack) 45,000lb Break Strength with 7/8 Inch Pin, Isolator and Washer Kits for Use with Tow Strap, Winch, Off-Road
This versatile D-ring shackle can pull up to 9500 lb. and easily fits all 2 in. hitch receivers. Use the receiver hitch to pull loads or retrieve
2 in. Hitch Mounted D-Ring Shackle
D-Ring Tool Shackles - Fall Protection
Safe-T-Strap%20Premium%204-Foot%20Cross-Arm%20Straps%20with%20Large%20and%20Small%20D-Rings%20%7C%20Pass%20Thru%20Loop%20Ends%20%7C%20Reusable%20Fall%
4' Cross-Arm Strap w/ Large & Small D-Rings
Construction Repair Tools Flat Icon Set Bench Small Tools Isolated On White Background Vector Illustration Stock Illustration - Download Image Now - iStock, Small Tools