By A Mystery Man Writer
Weighing in at approximately 160 grams (5.6 oz) the Niroc Knockometer was originally designed as a blade straightening tagane hammer, but they are also prized by panel beaters, tool makers, leather workers, saw doctors and tool repairers. They are useful to anyone that needs a small, but very hard hammer. These are han
Weighing in at approximately 160 grams (5.6 oz) the Niroc Knockometer was originally designed as a blade straightening tagane hammer, but they are also prized by panel beaters, tool makers, leather workers, saw doctors and tool repairers. They are useful to anyone that needs a small, but very hard hammer.
These are hand made and every effort and care is made to create a beautiful tool that, with care, will last. The heads are machined from brass bar. Brass is selected due to its relative density being heavier than steel for the same volume and its ability to deform. This “beds” the carbide and reducing the likelihood of chipping or fracturing. The carbide inserts are silver brazed in place with 45% silver brazing alloy, and the process I use ensures the brazing completely retains the insert.
The eye of my hammers is integral to the design and retention of the head on a handle, whether fitted by me or by you. I machine the eye with an hourglass taper, meaning the width of the eye is narrower in the middle of the hammer. When driven onto a tapered handle and wedged, the likelihood of it ever coming loose is slim to none.
Bosch Circular Saw Blade Eco for wood 190 x 30 Z48
Make your own chef knife. Kit knife Brisa Chef 160mm Kit blank, (Asian Style pre-shaped)
Niroc Tungsten Carbide Ball Peen X Brass Flat Straightening Hammer
Room Custom Knives
The 50mmx1220mm (2x48) size is a common size for Knife Grinding machines., Norton Rapid Prep surface conditioning belts are constructed with
Surface conditioning belt - 2 x 48 (50mm x 1220mm)
Straightening Hammers – Pops Knife Supply
This is a set of my six most popular hammer faces in three hammers., The Hammers Are, Copper x Teflon, Carbide Flat x Brass Flat, Carbide Ball
Hammer Set x 3 , ball peen, straight peen, brass flat, carbide flat, copper, Teflon
This is my budget product. They come with a basic sand blasted finish. The carbide ball peen end is press fit and crimped in place such that it will
Blade Straightening Hammer - The Chook
Carbide Hammer Archives - KHDaily Knives
Double Diagonal Peen Tungsten Carbide Hammer (DD Knockers)
Tungsten Carbide Ball Peen Blade Straightening and Riveting Hammer
Highlights, Handcrafted with precision, Tungsten Carbide Niroc Knockometer, Designed for blade straightening and precision work, Approximately 160
Niroc Tungsten Carbide Ball Peen X Brass Flat Straightening Hammer
Good consistent cut rate even at low and medium pressure, Excellent belt performance on medium to hard contact wheels, Low heat generation reduces
Ceramic abrasive belt 2 x 48 (50mm x 1220mm)
Tungsten Carbide Ball Peen Blade Straightening and Riveting Hammer
ARES 10025-3/8-Inch Drive Mini Hex Grip Manual Reversible Impact Driver – S2 Bits – Slotted 1/4, & 5/16 Bits - Phillips PH2 & PH3 Bits – 5/16 Slotted and PH2 Phillips Extra Long Bits